It is a smart card reader especially used for induction card (R) and electronic tag (RF).
Main specification:
1.The base station is PHLIPS CL RC632；
2.Can read and write contactless IC card (including double interface card) which follows ISO14443 TYPE A/B；
3.Can read various tags follow ISO15693；
4.Built-in SAM holder follow ISO7816；used for reading and writing of high speed/ ordinary SAM card；
5.Getting electricity in keyboard interface
6.Interface：RS232
7.Other qualifications:
An area of storage for data：8K～256K(optional)；Read-write distance：Mifare One>10cm；Com port baud rate：4800～115200 BPS；Power supply：DC5V + 10%；
The highest power consumption：1.5W；Environment Temperature：-10℃～ +70℃；Relatively humidity：35%～95%；Appearance dimension：123ⅹ88ⅹ25 (mm)；
Weight：About 100g
8.Electrifying state：The acquiescent baud rate of card reader after electrifying is 19200.
The working position of tricolor light emitting diode indication card reader，as show below:
| Color of indicator light |
Signification |
| Green |
Initialization |
| Red |
Success of initialization |
| Yellow |
Failure of initialization |
| Green（twinkle） |
ISP |
9.Software support：
Provide VB, VC++, C++ Builder, Delphi, Power Builder demo Applets.
